Black Fanatec Helmet Visor Sticker
Black Fanatec Helmet Visor Sticker
Couldn't load pickup availability
Add a black sim-racing-inspired motorsport look to your racing or karting helmet. The design features Fanatec-style branding in a dark layout. Each version is precision-cut for the visor shape selected at checkout.
Product details
- One pre-cut helmet visor sticker
- Versions available for Arai, OMP/Bell and Zamp visors
- Glossy or matte protective lamination
- Premium printed polymeric vinyl with RapidAir air-release technology
- Water, UV and normal-cleaning resistant
- Vinyl rated for up to seven years outdoors under normal conditions
- Designed and made to order in France
Installation
No transfer tape is required. Dry installation is recommended: clean and degrease the visor, align the sticker with the upper edge, then apply it gradually from one side. RapidAir channels help trapped air escape. Wet application is possible but unnecessary. The sticker can be removed later; any adhesive residue can be cleaned with isopropyl alcohol. Full installation instructions are available on our website.
Please select the correct helmet brand and finish before ordering.
Share
Graphics Installation
BEFORE INSTALLATION:
Firstly, you will need to prepare the surfaces to allow your stickers to adhere properly. Remove any old graphics/stickers from the surfaces, and ensure they are as clean as possible.
Applying heat to old graphics/stickers can soften the adhesive and make the removal process easier.
INSTALLING THE VISOR STRIP:
Take your time when installing your new visor sticker, as rushing the process will increase the likelihood of issues or mistakes.
If you chose the correct version the sticker should already have the correct shape for your visor. If not, the sticker can stretch and adapt to your visor.
Our sticker are printed on "Air Release" glue which should help applying the sticker without make air bubbles.
Start applying the strip from one edge. Position it a few millimetres from the mounting bolt and follow the top edge of the visor. If the position is not correct you can peel off the sticker and apply it again. This can be done a few times but make sure not to stretch it too much otherwise the length will increase.